It is made of high-performance basalt fiber and modified polyurethane resin by pultrusion process; Anti interference, corrosion resistance and service life are better than FRP, PVC and ABS products. 　　Product features 　　Low dielectric and low loss: it can effectively reduce the absorption and reflection of electromagnetic wave by radome, reduce signal loss, and have better wave transmission performance, which can better meet the requirements of 5g communication for high frequency and low loss of materials; 　　Lightweight: good environmental adaptability, no fear of severe cold, heat, ultraviolet, wind, frost, rain and snow, rigidity, excellent dimensional stability and flame retardancy. Greatly improve the protection of outdoor antenna, prolong the service life of antenna and reduce the maintenance cost of antenna. 　　Environmental protection: environmentally friendly and recyclable.

　　It is made of high-performance basalt fiber and epoxy resin through more than ten processes such as winding and high-temperature curing. 　　Product features 　　It has better performance than metal cylinders (steel cylinders and aluminum alloy seamless cylinders). The working pressure of the cylinder is 30MPa, which increases the gas storage capacity 　　The weight is 50% less than that of metal cylinders with the same volume, which is easier to use. It is more convenient to use in high-rise buildings or deep underground, such as mines, in case of rescue or serious disasters. 　　Product features 　　Working pressure: 30MPa; 　　Volume specification: 5L, 10L, 15L; 　　Maximum operating temperature: 80 ℃

　　It is made of high-performance basalt fiber and epoxy resin by winding, which can be made into elbow and straight pipe. It has a variety of connection modes, and can be widely used in petroleum, mining, industrial transportation of corrosive liquids, chemical industry, papermaking, municipal water supply and drainage, water diversion and drainage of hydropower stations, etc. 　　Product features 　　It has excellent corrosion resistance, antifungal and microbial effects; 　　Low thermal conductivity and light specific gravity (1.8 ~ 2.0g / cm3), only 1 / 3 of carbon steel, 1 / 5 of cast iron pipe and 1 / 10 of prestressed concrete pipe; 　　The anti-corrosion measures without thermal insulation have a service life of 60-80 years, which is 2-3 times that of metal pipes. 　　Product performance 　　Ring stiffness: ≥ 15kn / m2; 　　Axial tensile strength: ≥ 400kN / M; 　　Circumferential tensile strength: ≥ 1700kn / M; 　　Axial elongation at break: 1.2%; 　　Circumferential elongation at break: 1.1%.

The minimum service temperature of long crystal basalt fiber needle punched felt is as low as - 260 ℃, the thermal conductivity is as low as 0.025w / m · K at - 196 ℃, and the fiber strength retention rate at this temperature exceeds 99%. It can be used as ultra-low temperature thermal insulation materials for liquid methane, oxygen, nitrogen and other production lines or storage products. Product features 　　Good thermal insulation performance, the thermal conductivity at - 196 ℃ is as low as 0.025w / m · K; 　　The service temperature can be as low as - 260 ℃, and there is no collapse under this temperature condition; 　　Stable performance, strength and other mechanical properties do not decrease under ultra-low temperature environment; 　　Good environmental adaptability and long service life. 　　Product performance 　　Bulk density: (50 ~ 200) kg / m3 　　-Thermal conductivity at 100 ℃: ≤ 0.03w/m · K; 　　-Thermal conductivity at 200 ℃: ≤ 0.025w/m · K; 　　Flame retardant: class V-0.

　　It is woven with high-strength and high-performance basalt fiber, which has the characteristics of high temperature resistance, acid and alkali resistance, oxidation resistance, hydrophobicity and stable size. It can meet the dust removal operation environment with harsh conditions and improve the dust removal efficiency. It can be used for high temperature filtration and dust removal of suction and discharge vehicles in cement plants, iron and steel plants and thermal power plants. 　　Product features 　　High mechanical strength, breaking strength above 3000n; 　　Low elongation and stable size of filter bag; 　　Good corrosion resistance, can be used in acid and alkali atmosphere; 　　High porosity, smooth surface, good air permeability, no-load pressure loss is only 2PA; 　　The dust collection efficiency can reach 99.5% ~ 99%, and the effect is more obvious for dust particles with diameter less than 0.5mm; 　　It has strong adaptability to the dust content and concentration of flue gas, large amount of flue gas, convenient operation and maintenance and easy ash removal. 　　Long service life. 　　Product performance 　　Area density: 1000g / m2; 　　Thickness: 2.5 ~ 3.0; 　　Air permeability: 8 ~ 16m3 / m2 · min; 　　Breaking strength: ≥ 2000N / 50mm; 　　Operating temperature: 450 ℃; 　　Instantaneous working temperature: 600 ℃; 　　Filtering wind speed: 0.5 ~ 1.1m/s.

　　The main material is basalt sound-absorbing cotton. The basalt noise reduction board composed of it and the installation outer box is installed outside the high-voltage transformer. The noise reduction performance is up to more than 12dB, which is significantly improved compared with the traditional noise reduction treatment. 　　Product features 　　It has noise reduction effect on noise within 20kHz, and significantly reduces noise from 200Hz to 2500Hz. 　　With the increase of noise, the noise reduction effect is more obvious. 　　Product performance 　　Bulk density: (30 ~ 50) kg / m3; 　　Noise reduction performance (90mm): ≥ 10dB; 　　Thermal conductivity: ≤ 0.035w / (m · K); 　　Flame retardant: grade B1;

　　Basalt fiber insulator core rod is composed of high-strength basalt fiber, high-temperature resistant resin (modified epoxy resin), curing agent (methylhexahydrophthalic anhydride), lubricant, defoamer and thixotropic agent, which is formed by pultrusion process. 　　Product features 　　High mechanical strength to meet the demand of power industry for large diameter and high strength mandrel. 　　Reliable structure, stable performance and large margin for safe operation. 　　Avoid flashover, breakdown and pollution flashover accidents and ensure the safe operation of the line. 　　Good temperature resistance and insulation performance to meet the requirements of large diameter and high strength mandrel for high voltage and UHV circuits. 　　Product performance 　　Mandrel diameter: 16mm ~ 150mm 　　Temperature resistance range: 180 ℃ ~ 220 ℃ 　　Creep rate: 4% ~ 5% 　　Tensile strength: 1200 ~ 1500MPa 　　Bending strength: 1200 ~ 1400MPa 　　Creep rupture stress: ＞ 54% * ultimate tensile strength

Basalt fiber high pressure pipeline is a kind of high pressure pipe made of basalt fiber and resin by winding. It can be made into bend and straight pipe, and has many connection modes.

Basalt fiber insulation tape is made of basalt fiber woven cloth coated with uncured phenolic resin or epoxy resin with bonding characteristics. After curing, it has the characteristics of high resistance, high strength, high temperature resistance and low friction coefficient.

Basaltfiberclutchplateisakindofcompositematerialwithfrictionasthemainfunctionandstructuralperformancerequirements.

Basalt fiber reinforced automobile brake pad is made of chopped basalt fiber and friction grade carbon material through high temperature carbonization at 1200 ℃.

Basalt fiber is one of the four key high-tech fibers developed in China. It is a continuous fiber drawn by platinum rhodium alloy drawing leakage plate at high speed. It is a new inorganic environmental protection and green fiber material.